The Cost of Decommissioning Wind Turbines is Huge

Decommissioning Blades

Wind turbine blades are made of a tough but pliable mix of resin and fiberglass—similar to what spaceship parts are made from. Decommissioned blades are difficult and expensive to transport. They can be anywhere from 100 to 300 feet long and must be cut up on-site before getting trucked away on specialized equipment to a landfill that may not have the capacity for the blades. Landfills that do have the capacity may not have equipment large enough to crush them. One such landfill cuts the blades into three pieces and stuffs the two smaller sections into the third, which is cheaper than renting stronger crushing machines.

One company has found a way to recycle blades by grinding them up to make small pellets that can be used for decking materials, pallets and piping. The company opened its first processing facility in central Texas this year and is leasing a second space near Des Moines, Iowa. Given that the United States now has almost 100 gigawatts of wind capacity and that the life span of wind power is generally 20 years—much less than the traditional capacity it is replacing—finding technologies for recycling of the parts is becoming extremely important. (This shorter lifespan of this capital investment also means the replacement power needs to be recapitalized 2 to 3 times compared to power from conventional generation technologies, a little-discussed economic burden facing consumers in the future.)

Europe’s Decommissioning of Wind Turbines

In 2018, 421 megawatts of wind power were decommissioned in Europe—down from 683 megawatts in 2017. Of the turbines that were decommissioned in 2018, most were in Germany (249 megawatts), followed by the Netherlands (72 megawatts), Austria (29 megawatts), Greece (15.4 megawatts), Portugal (13.7 megawatts), Sweden (13.3 megawatts), Denmark (12.7 megawatts), France (12.6 megawatts), and Finland (3 megawatts). Most of the decommissioning (407 megawatts) was in onshore wind. Out of the decommissioned 421 megawatts, a number of projects were repowered (repopulated with new turbines). The projects that were repowered in 2018 and a part of decommissioned capacity in 2017 resulted in 461 megawatts of repowered capacity. The majority of the repowered projects were in Germany, but repowering also occurred in Austria, France, Portugal, and Spain.

In Europe, land is at a premium, and waste management rules result in some companies selling older parts to customers in Asia, Latin America, and Africa. Germany has over 28,000 wind turbines and by 2023 more than a third must be disposed of through decommissioning or sale to other countries.

New projects commit to set aside 2 to 3 percent of the capital cost each year for decommissioning, but it is unclear whether this amount is sufficient to cover the costs when the wind turbines are dismantled twenty or so years later. Costs of decommissioning depends on location—offshore or onshore—and the age of the technology as newer turbines are larger than the older models.

An offshore wind farm in the United Kingdom was decommissioned earlier this year. The Blyth offshore wind farm is a two-wind-turbine farm. One of the two wind turbines was recycled and reused for spare parts within the company’s onshore fleet, and the other was used for training purposes. The plant had a shorter life span than most commercial wind projects, operating for just 19 years. The company did not release the cost for dismantling Blyth, but indicated that it was similar to building the project. Repowering of offshore wind farms is deemed unlikely because of the rapid evolution of the offshore turbine technology.

Conclusion

As with other aspects of renewable energy, the decommissioning of wind turbines was not planned out well in terms of their disposal when their useful life is over. Because wind turbines have a shorter life span than most other technologies, the dismantling of these units is already in progress in Europe and will soon be needed in the United States. Due to the size of the units, landfills do not have the capacity or equipment to break down the huge rotor blades. Repowering is being done in Europe and some turbines are resold to developing nations. But, needless to say, it is expensive to decommission wind turbines and who pays when the funds are not sufficient to cover the expense is an issue.